Started by taking off the rotted out shelves and sanding it down.
But the top was sagging
So I tried weighing the top down overnight
Which didn't do any good. Plan B did work, which was to screw two 2x4's to the underside.
Next was water based primer, used about half of one quart.
Then a top coat of exterior latex semi-gloss, "Red Potato" color.
Cut some wire shelving using an angle grinder, screwed the shelves down, and put some blocks under the feet. Scored and cut some Hardibacker cement board for a work top.
We'll see how long this lasts from June 2023.
